It may look small, but this desk actually has lots of storage. The shelves can be adjusted to fit different things and the cable outlet at the back keeps cables organised.
Dimensions
Dimensions
Product Dimensions
Width: 105 cm
Depth: 50 cm
Height: 140 cm
Depth: 50 cm
Height: 140 cm
Package Details
This product comes as 2 package(s).
Article Number
901.800.25 x1
Package : 1
Length : 128 cm
Width : 59 cm
Height : 4 cm
Diameter :
Gross Volume : 28.4 l
Article Number
802.130.74 x1
Package : 1
Length : 111 cm
Width : 75 cm
Height : 10 cm
Diameter :
Gross Volume : 87.2 l
Article Number
901.800.25 x1
Package : 1
Length : 128 cm
Width : 59 cm
Height : 4 cm
Diameter :
Gross Volume : 28.4 l
Article Number
802.130.74 x1
Package : 1
Length : 111 cm
Width : 75 cm
Height : 10 cm
Diameter :
Gross Volume : 87.2 l
Product Details
Product Details
Included products
MICKE add-on unit high (90180025)
Quantity x1
MICKE desk (80213074)
Quantity x1
Quantity x1
MICKE desk (80213074)
Quantity x1
Material
Table top/ Side panel/ Bottom panel: Particleboard, Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Fibreboard, Acrylic paint, Plastic edging, Plastic edging
Supporting leg: Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Fibreboard, Acrylic paint, Plastic edging, Plastic edging
Cable management/ Back rail/ Shelf/ Front: Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer side/ Drawer back: Paper foil
Drawer bottom: Fibreboard, Acrylic paint
Leg: Steel, Epoxy/polyester powder coating
Side panel/ Partition/ Top panel: Particleboard, Fibreboard, Honeycomb structure paper filling (min. 70% recycled), Acrylic paint, Plastic edging, Plastic edging
Shelf: Particleboard, Melamine foil, Plastic edging, Plastic edging
Back panel: Fibreboard, Acrylic paint
Notice board: Steel, Paint
Supporting leg: Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Fibreboard, Acrylic paint, Plastic edging, Plastic edging
Cable management/ Back rail/ Shelf/ Front: Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer side/ Drawer back: Paper foil
Drawer bottom: Fibreboard, Acrylic paint
Leg: Steel, Epoxy/polyester powder coating
Side panel/ Partition/ Top panel: Particleboard, Fibreboard, Honeycomb structure paper filling (min. 70% recycled), Acrylic paint, Plastic edging, Plastic edging
Shelf: Particleboard, Melamine foil, Plastic edging, Plastic edging
Back panel: Fibreboard, Acrylic paint
Notice board: Steel, Paint
Care Instructions
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Wipe dry with a clean cloth.
Good to Know
Safety and compliance
This product has been developed and tested for domestic use.
Safety and compliance
When completed with an add-on unit, the whole combination must be placed against a wall to avoid the risk of tipping.
When the add-on unit is placed on top of a desk, the whole combination must be placed against a wall to avoid the risk of tipping.
This product has been developed and tested for domestic use.
Safety and compliance
When completed with an add-on unit, the whole combination must be placed against a wall to avoid the risk of tipping.
When the add-on unit is placed on top of a desk, the whole combination must be placed against a wall to avoid the risk of tipping.
Designer
Henrik Preutz
Benefits
You can adjust the shelves to fit different things, and adjust them again whenever you need to. Adjustable shelves help you use your space more efficiently.
Extra room above the top shelf where you can keep your books, CDs or DVDs. The side panels act as bookends and keep everything in place.
It’s easy to keep sockets and cables out of sight but close at hand with the cable outlet at the back.
You can mount the storage unit to the right or left, according to your space or preference.
Air ventilates effectively around your computer or other equipment because of an opening in the back panel.
Drawer stops prevent the drawers from being pulled out too far.
You can extend your work surface by combining desks and drawer units. All desks and drawer units in the MICKE series are the same height.
You can attach magnets to the metal surface and use it as a pin board.
Extra room above the top shelf where you can keep your books, CDs or DVDs. The side panels act as bookends and keep everything in place.
It’s easy to keep sockets and cables out of sight but close at hand with the cable outlet at the back.
You can mount the storage unit to the right or left, according to your space or preference.
Air ventilates effectively around your computer or other equipment because of an opening in the back panel.
Drawer stops prevent the drawers from being pulled out too far.
You can extend your work surface by combining desks and drawer units. All desks and drawer units in the MICKE series are the same height.
You can attach magnets to the metal surface and use it as a pin board.
Reviews
Reviews
Material
What is constructed board?
We use constructed boards when manufacturing many of our pieces of furniture, such as tables and wardrobes. They are light yet still stable and strong. Each board has a frame made of chipboard, fibreboard or solid wood, while the inside is a honeycomb filling structure made of mostly recycled paper, which is extra durable thanks to its special construction. The board is then covered with a protective paint, foil or veneer depending on the style wanted.
