Build your PLATSA storage as you want it – high or low, under a sloping ceiling or along an entire wall. It assembles in minutes with a simple “click”. Finish with doors and interior organisers as needed.
Depth: 57 cm
Height: 123 cm
Article Number
404.978.28 x2
Package : 1
Length : 57 cm
Width : 4 cm
Height : 3 cm
Diameter :
Gross Volume : 0.7 l
Article Number
103.859.26 x3
Package : 1
Length : 88 cm
Width : 20 cm
Height : 2 cm
Diameter :
Gross Volume : 3.6 l
Article Number
603.309.55 x3
Package : 1
Length : 125 cm
Width : 56 cm
Height : 10 cm
Diameter :
Gross Volume : 66.7 l
Article Number
203.311.98 x3
Package : 1
Length : 24 cm
Width : 18 cm
Height : 3 cm
Diameter :
Gross Volume : 1.3 l
Article Number
603.312.00 x12
Package : 1
Length : 20 cm
Width : 17 cm
Height : 3 cm
Diameter :
Gross Volume : 1.0 l
Article Number
403.311.64 x1
Package : 1
Length : 77 cm
Width : 55 cm
Height : 2 cm
Diameter :
Gross Volume : 9.8 l
Article Number
605.055.11 x2
Package : 1
Length : 56 cm
Width : 7 cm
Height : 1 cm
Diameter :
Gross Volume : 0.5 l
Article Number
303.316.97 x3
Package : 1
Length : 90 cm
Width : 58 cm
Height : 2 cm
Diameter :
Gross Volume : 12.4 l
Article Number
003.309.82 x3
Package : 1
Length : 81 cm
Width : 55 cm
Height : 5 cm
Diameter :
Gross Volume : 24.1 l
Article Number
903.955.54 x4
Package : 1
Length : 129 cm
Width : 40 cm
Height : 2 cm
Diameter :
Gross Volume : 10.4 l
Quantity x2
FONNES drawer front (10385926)
Quantity x3
PLATSA frame (60330955)
Quantity x3
LÄTTHET leg, adjustable (20331198)
Quantity x3
HJÄLPA standard hinges (60331200)
Quantity x12
HJÄLPA shelf (40331164)
Quantity x1
HJÄLPA suspension rail, 55 cm (60505511)
Quantity x2
SPILDRA top for storage module (30331697)
Quantity x3
HJÄLPA drawer without front (00330982)
Quantity x3
SANNIDAL door (90395554)
Quantity x4
Rail: Particleboard, Paper foil
Panel: Fibreboard
Drawer front/ top for storage module: Particleboard, Paper foil
Standard hinges: Steel, Nickel-plated
Basematerial: Steel, Epoxy/polyester powder coating
Wheel: Acetal plastic
Drawer bottom: Fibreboard, Plastic foil
Tube: Steel, Epoxy/polyester powder coating
Connection: Polypropylene plastic
Stop fitting: Synthetic rubber
Suspension rail: Steel, Epoxy/polyester powder coating
Leg, adjustable: Steel, Polypropylene plastic, Galvanized
Wipe dry with a clean cloth.
You can easily attach several PLATSA frames to each other using the included clips. They are easy to mount and remove without using tools, and you avoid visible screw holes on the outside.
You can organise the inside with interiors from the HJÄLPA series – and for the exterior there are smart solutions in the LÄTTHET series.
Adjustable feet make it possible to compensate any irregularities in the floor.
With PLATSA home planner tool, you can easily create a solution that is adapted to you, your home and your storage needs.